FULL RANGE OF PRODUCTS MANUFACTURED

POLYMER GRADES

• Melt 2 and Melt 4 General Polythene Grades
• Melt 1 Low Slip Sack Grade and Shrink Film Grade
• Repro Material (clear/grey) usually available at large discount
• Full range of Colour Masterbatch and Additives (UV/Anti-static/EVA)

EXTRUSION

• Minimum 2” (50mm)
• Maximum 40” (1016mm)
• Film thickness minimum 100gauge (25mu)
• Film thickness maximum 1000gauge (250mu) *Maximum 500gauge (125mu) above 36” wide)
• Film can be supplied Treated for print and/or Gussetted across range
• Simple 1 Colour In-Line Print available for 2” – 12” narrow film Centre Fold and Single Wound Sheet Winding facilities for film wider than 14” (365mm)

CONVERSION

Bottom Weld

• Conversion Facilities with air hole punch and magic eye registered print
• Minimum width 2” / Minimum length 3.5”
• Maximum width 40” / Maximum length 105” (reduced to 80” for narrow film less than 12” wide)

Side Weld

• Conversion Facilities with air hole punch and magic eye registered print
• Carrier Bag Punch Unit
• Minimum width 4” / Minimum length 5”
• Maximum width 24” / Maximum length 48”

PRINT

In addition to 1 colour in-line print facility for narrow film and for laundry film on the roll, we are installing a 4 colour off-line print facility Autumn 2007.

LAUNDRY PRODUCTS

• 20/24” Garment Film on the Roll with Perforating Unwind
• Bi-Extruder for clear/white window Laundry film with Perforating Unwind
• Stand along Garment Bag Makers for Boxed/Bagged Shaped Garment Covers